Wafer-upper-banner
Shanghai Wafer Microelectronics Co.,Ltd.

Pulse type Coin acceptor to PC interface ( PULSE-RS232 type)

$15.00

Payments by PayPal

Pulse type Coin acceptor to PC interface ( PULSE-RS232 and PULSE-USB)

The WF-700-RELAY or WF-700USB is an pulse to interface module for most models of coin acceptor products. The WF-700-RELAY has a built-in true RS232 port on its uplink communication port to interface with the serial port on a PC and a downlink port with inhibit line to interface with validators.
(This link is for WF-700-RELAY , if you want to order the USB type,please check another link for WF-700USB)

WF-700-RELAY


The WF-700-RELAY or WF-700USB is an pulse to interface module for most models of coin acceptor products. The WF-700-RELAY has a built-in true RS232 port on its uplink communication port to interface with the serial port on a PC and a downlink port with inhibit line to interface with validators.

WF-700,WF-700B are all updated to WF-700-RELAY or WF-700USB !!!

( For MDB type Coin validator and bill acceptor to PC, please check:MDB-PC adapter )

1.0 Introduction
The WF-700-RELAY is an RS232 interface module for most models of coin acceptor products. The WF-700-RELAY has a built-in true RS232 port on its uplink communication port to interface with the serial port on a PC and a downlink port with inhibit line to interface with validators. 
With the WF-700-RELAY, the end operator can treat all different kinds of validators as a standard RS232 device and can concentrate on the real operation of the validator rather than the tedious interface work of the hardware discrepancy. On the PC platform, the software developer can easily program the validators via the WF-700-RELAY with common computer languages such as Visual Basic / C++.


2.0 Compatibility
WF-700-RELAY / WF-700USB is a successor of the WF-700 model. WF-700-RELAY is 100% functionality compatible to WF-700. With the DIP Switch, a more versatile configuration can be setup to interface with over 90% of the most commonly used banknote / coin validators found in the market.

3.0 Communications
This interface is a three wire interface using a Transmit line (TXD), a receive line (RXD) and a Common line. The Host machine is thought of as being the Master device. The WF-700-RELAY / WF-700USB is the slave device that responds only to the polls (or requests) from the Master.
In this polled system, the Master requests information from the WF-700-RELAY at a periodic rate. This rate can be as fast as every 30 milliseconds or as slow as the elapse time defined by the Lockout Timer. Faster rates are more desirable since overall system performance (in terms of bills/coins per minute accepted) will be higher at high poll rate system.
WF-700-RELAY has a “Lockout” Timer feature that it will disable the acceptor if the specified poll rate is not met. In another words, if the host system is too busy to keep up with the desired minimum poll rate, WF-700-RELAY will put the acceptor into the Disabled mode. The acceptor will be enabled again once the communication resumes.


Baud rate

Start bit

Data bits

Parity

Stop bit

9600 BPS

1

8

NO

1

Hardware Specification.


Power

Cable

Dimensions

Weight

12 VDC
Consumes an idle current  < 0.05A
0.5A for 1 sec. when accepting coins

Standard computer serial cable

approx. 75 x 65 x 30 mm

approx. 115 g

(Download : Manual of WF-700-RELAY)


Add to Cart:

  • Model: WF-700-RELAY
  • Shipping Weight: 0.5g
  • 99 Units in Stock
  • Manufactured by: Wafer Microelectronics Co.,Ltd.


This product was added to our catalog on Wednesday 14 August, 2013.

Customers who bought this product also purchased...


Shanghai Wafer Microelectronics Co.,Ltd.
 
这个网站笑话库提供最好的笑话供你选择,每天哈哈一笑,缓解疲劳.
Phone signal is not really the radiation, I think cell phone signal jammer can give you the answer, you try to know, huh.
Cell phone blocker to block the 3G 4G mobile phone signal similar, in the process of buying, we should note that we need to distinguish the type of signal blocking.
Who knows how can signal jammers to sell? This site has Signal Jammer, but you need to have legal procedures.
Some taxi fleet operators to install their own cell phone signal jammer, designed to prevent the use of mobile phones while driving on the way to improve the safety index.